Accessorize your awning with a range of storm supports and tie down kits including the full range of Fiamma Rafters and Rafter Pro. Camperlands also stock an extensive range of buckle tie down kits, door poles and rear support poles to give your awning a better seal against your caravan or motorhome.
Awning fixing kits for mounting the Fiamma F35, F45 and F65 case awnings to your camper van or motorhome. With kits available for Sprinter, Ducato, Transit and all varieties of VW camper it is easy to choose the correct adapter kit for your vehicle for safe and secure fixing of your Fiamma awning.
Add a little privacy or shade to your Fiamma caravan or motorhome awning with a range of rooms, walls and sun-shades for the Fiamma range of awnings. Camperlands stock the Fiamma Blocker and Blocker Pro side panels for Fiamma F45 and Caravanstore awnings and offer great prices on Privacy and Safari rooms.
Pair of seals to prevent water dripping in on Fiamma Privacy Room fitted to F45 S and ZIP S awnings.
Telescopic roof tension rafter for Fiamma F35 and Caravanstore awnings. Fiamma Rafter CS strengthens your roll-out awning and helps prevent the roof sagging and water pooling in the centre. New version telescopic Rafter pole to fit Caravanstore XL awnings with 250cm extension from the caravan.
Additional length of Fiamma Rain Guard for F65 awnings.
The Fiamma Rain Guard Sample pack consists approximately 10cm lengths of each of the Fiamma Rain Guard S, M, L and Lower. If you are unsure which Rain Guard you require purchase this pack to check and test the different styles of Rain Guard with your awning.
Fabric security strap for Fiamma F35 Pro awning to ensure the awning case remains safely closed when travelling over rough ground.
Convenient rubber strip to seal the gap between the awning case and vehicle roof for F45 S awnings installed above the level of the vehicle wall.
Convenient rubber strip to seal the gap between the Fiamma awning and the motorhome wall to prevent water from dripping down from behind the awning case. This version Rain Guard is for Fiamma F45 and Fiamma ZIP awnings mounted on to motorhome wall where the wall sticks up above the top of the awning case.
Convenient rubber strip to seal the gap between the Fiamma awning and the motorhome wall to prevent water from dripping down from behind the awning case. This version Rain Guard is for Fiamma F45 and Fiamma ZIP awnings mounted on to motorhome wall where the wall sticks up above the top of the awning case.
Convenient rubber strip to seal the gap between the Fiamma awning and the motorhome wall to prevent water from dripping down from behind the awning case. This version Rain Guard is for Fiamma F45 and Fiamma ZIP awnings mounted on to motorhome wall where the wall sticks up above the top of the awning case.
A pack of 3 x approximately 80cm sections of Figure 8 sections for connecting your drive-away awning to a combi rail or a "J" or "C" profile awning rail on campervans or motorhomes.
A 2.5m (250cm) length of plastic figure of 8 awning channel connector which allows you to connect drive-away awnings to either "C" or "J" shaped awning rail on campervans and motorhomes.
A replacement ground spike used with tie down kits. V shaped 38cm in length.
Heavy duty replacement pegging rubber for tents, trailer tents and awnings. Sold individually.
A Strong heavy duty peg ideal for seasonal pitches
Heavy duty screw pegs set using strong materials for a long lasting peg .Ideal for hard and stony ground.